carbon build up cleaner valves combustion chamber EGR turbo MotorPower care

Description

MotorPower care Carbon Cleaner:
The latest technology formula that reaches deep areas, dissolves & removes carbon residues from the cylinder head area (valves, piston crown, EGR, turbocharger, intake manifold). Product tested for effectiveness & safety on engine components.
Product Properties:
- Removes operationally caused deposits from the entire combustion chamber and cylinder head area (valves, piston ring, piston crown...)
- No dismantling required for the intake manifold or cylinder head.
- Deep & effective cleaning reaches difficult to access areas.
- Non-corrosive product does not attack seals.
- For Gasoline & Diesel engines.
Instructions:
1- Shake the can so well before use.
2- Vehicle engine’s needs to be warm when you start the process.
3- Take 1 spark plug out (Gasoline engines) or injector on (Diesel engines).
4- Check intake valve with endoscope, turn engine manually till the intake valves are open all the way.
5- Spray MotorPower care Carbon cleaner in the combustion chamber till the white foam comes out the access port.
6- Let it react for 20 minutes, then repeat K1 another 2 times (total 3 times if needed).
7- Extract the resulting emulsion with a vacuum (extractor).
8- Restore spark plug and turn the engine on, warm it up for 1-2 minutes and then remove the second cylinder spark plug and repeat steps 5 – 6 -7 & 8 till you finish all the cylinders.
- After cleaning with all cylinders with MotorPower carbon cleaner, we recommend induction cleaning.
9- Erase Codes.
* Another way to clean carbon build up on valves:
Remove intake manifold, you need to use a heat gun warm up the valves & port then spray the carbon cleaner directly on the valves let it react for 10min then repeat if needed.
- 500ml can can treat 6 cylinder engine.