EarthQuaker Devices Spatial Delivery V2 *Free Shipping in the USA*

Description

Spatial Delivery™
Envelope Filter with Sample & Hold
What’s
up bud! Welcome to your brand new Spatial Delivery™! The Spatial
Delivery is an oddball, a voltage controlled envelope filter that allows
you to step outside the universe of funk while reinforcing your secret
love affair with auto-wah. It has 3 modes- Up Sweep, Down Sweep and
Sample and Hold. With Range, Resonance and Filter controls you can get
super emphasized filter sweeps in the Up and Down modes. The Range, in
combination with pick attack, controls the sensitivity and reaction time
of the envelope and thus the width of the frequency sweep. The higher
the Range and harder the attack equals a faster reaction time and higher
frequency sweep and vice versa. Reign in the controls a bit, add your
favorite overdrive/fuzz after the Spatial Delivery and you’ve got a real
nice resonant, cut-through-the-mix lead tone. Crank the controls back
up and you’re a neo-bedroom rock god. In the Sample and Hold mode the
filter is controlled by random voltage and the Range controls the speed.
Add a sub octave into the mix (before or after) and you’ve just created
a deep fried space droid computer freak-out. The filter can be cross
faded between high pass (counter clockwise), band pass (center) and low
pass (clockwise) for a wide variety of voices. The Resonance control
goes from zero to the brink of oscillation and adds more body and ring
to the filter voice. We recommend placing the Spatial Delivery first in
your signal chain. However, due to its envelope control, experimenting
with pairing and signal chain placement can take the potential of the
Spatial Delivery even further. Each Spatial Delivery is hand made bit by
damn bit in silver studded Akron Ohio.
This device is true bypass and uses relay based “soft touch” switching. Audio will not pass without power.
List Price:
9.00
Controls
Mode Toggle:
This toggles between upward sweep, downward sweep or sample and hold.
Range:
Adjusts the sensitivity of the envelope in Up and Down mode. In Sample and Hold mode, this controls the speed.
Filter:
This crossfades between high pass and low pass filters and allows you
to get everything in betwee. High pass is fully counter clockwise, low
pass is full clockwise and center is band pass. This is much more useful
than a simple switch because it allows you to blend the filters for
different sounds!
Resonance:
This is the filter feedback control, it adds more body and ring to the filter voice.
Flexi-Switching
This
device features Flexi-Switch™ Technology! This relay-based, true bypass
switching style allows you to simultaneously use momentary and latching
style switching.
For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.
For
momentary operation, hold the footswitch down for as long as you’d like
to use the effect. Once you release the switch the effect will be
bypassed.
Since the switching is relay based, it requires power to pass signal.
Measures
4.75″ x 2.50″ x. 2.25″ with knobs
Power
The
Spatial Delivery can be powered by a standard 9-volt DC power supply
with a 2.1mm negative center barrel. We always recommend pedal-specific,
transformer-isolated wall-wart power supplies or multiple
isolated-output supplies. Pedals will make extra noise if there is
ripple or unclean power. Switching-type power supplies, daisy chains and
non-pedal specific power supplies do not filter dirty power as well and
let through unwanted noise. Do not run at higher voltages!
Current Draw:
69mA
Input impedance:
500K
Output impedance:
<1K
WARNING
: This
product can expose you to chemicals including Cobalt, which is known to
the State of California to cause cancer and birth defects or other
reproductive harm. For more information go to .